Table of Contents
Advertisement
D I S T R I B U T I O N S O LU T I O N S
—
Product description
Cable test truck
The cable test truck allows the insulation tests to
be carried out on the power cables without
accessing the feeder unit or disconnecting the
cables from the switchgear.
The use of these trucks foresees removal of the
switching device from the switchgear (circuit-
breaker or contactor) and its replacement with the
truck, as shown in figure 1.
During the racking-in phase in OneFit frame the
metallic shutter shall be open and the truck opens
the ANSI insulating shutters if present and, by
means of its connectors allows connection to the
switchgear cable side.
Figure 1. Sinottic diagram
Figure 3 Shows Cable test truck features in front
view
1
2
3
Figure 3. Cable test truck features, front view
Cable test truck
Cable test truck can be delivered on demand with
a trolley for its transportation, as shown in figure
2 (1). Cable test truck mounts earthing plier (2),
insulators (4) and clusters (3) for the connection
with the OneFit copper adaptation system.
4
3
2
1
Figure 2. Cable test truck fatures, side view
4
5
6
7
1 Phase terminal for test lead connection
2 Ball earth terminal for Live working -
Portable equipment earthing connection
3 Cable test truck racking operation point
4 VPIS capacitive insulator (optional)
5 Ball phase terminal for portable
equipment for earthing connection
6 Rating label
7 VPIS voltage presence indicating system
according to IEC 62271-206 (on demand)
7
Advertisement
Table of Contents
