Removing And Installing Rack Doors; Removing And Installing The Front Door - Lenovo 9308-4PX Installation Manual

To remove the upper 6U side covers from the rack cabinet, complete the following steps.
Figure 4. Removing the upper 6U side covers from the rack cabinet
1. On the top of the rack cabinet, loosen the four screws that hold the side cover in place.
2. Tilt the side cover slightly toward you; then, remove it from the rack cabinet.
3. Repeat this procedure to remove the other upper side cover.
Reverse this procedure to install the upper 6U side covers on the rack cabinet.

Removing and installing rack doors

All enterprise racks come with front and rear doors installed. Remove the rack doors when you install and
remove devices in the rack, if part of the rack is obstructed by the door as you install devices.

Removing and installing the front door

To remove a front door from the rack cabinet, complete the following steps.
.
Chapter 2 Installing a rack cabinet
7