Symptom
Can't select Dolby Pro
Logic ll Mode.
There is no sound when
playing DTS encoded DVD
and CD.
Product Protection Function
Heat Protection
• Protection function works if the main unit is overheated or power
transformer is overheated.
"
" appears in the display when this function
works.
- If speaker terminal is shorted
- If speaker cord is shorted
If there is no problem when you turn it on again after turning it
off, PROTECTION mark will disappear on the display and the
unit will work properly.
Check
Is the input signal selected properly?
•
Is analog input selected?
•
Remedy
Select 2 channel Dolby Digital, PCM, and
•
Analog input signal.
Check whether digital external component
•
is properly connected and refer to page 22
to select the digital input.
If PROTECTION appears on the display,
•
check whether speaker terminal is shorted
and then turn on the device.
47