SAFETY INSTRUCTIONS This STB has been manufactured to satisfy international safety standards. Please read the following recommended safety precautions carefully. MAINS SUPPLY: AC 100-240V~, 50/60Hz OVERLOADING: Do not overload wall outlets, extension cords or adapters as this can result in fire or electrical shock. LIQUIDS: Keep liquids away from the STB.
CONNECTING YOUR “STB” 1. LOCATION OF THE RECEIVER Your “STB” should be placed under proper ventilation. Don’t put in completely enclosed cabinet that will restrict the flow of air, resulting in overheating. The location should be safeguarded from direct sunlight, excess moisture, rough handling or household pets.
DESCRIPTION Front Panel This key is for turning the receiver on and Standby. This key is for entering and confirming any data to the receiver in the menu system. This key is for selecting the item. Press while viewing TV and a list of channels is displayed. These keys are for changing the channels during watching TV and for moving the highlight bar for selecting options on the menu.
DESCRIPTION Remote Control Unit 1. POWER This is for switching the receiver ON/STANDBY mode. 2. 0-9 NUMERICAL keys These keys are to enter numeric values and to select the channel directly by entering its number. 3. PG+/PG- These keys are for moving up or down pages on the menu and TV/Radio list.
BASIC FUNCTIONS 1. Display Screen Before you can view the television program, you must perform the installation. Therefore you will see only menu images at first. After the television channels have been programmed, you will see the following picture(banner) each time you switch channels: Channel Number Signal Status Program Information...
Page 8
BASIC FUNCTIONS 6.1 Service Favorites Press the GREEN(TEXT) key on the control unit to select the Favorites list. Press the GREEN(TEXT) key to switch between favorite list and channel list. Use the / , PG+/PG- keys to select a favorite group or a channel that you want.
Page 9
BASIC FUNCTIONS 9. Teletext OSD When the current broadcasting program provides Teletext, press the GREEN(TEXT) key twice to see the current language list for Teletext in order to get teletext in OSD regardless of TV type. [T] at the right corner on the banner shows that Teletext is available on this event(program).
OPERATING THE RECEIVER Main Menu After installing your antenna system and STB with appropriate connectors. Plug in the AC main power and switch on the receiver. Press MENU key to bring up the main menu. The LED display will show “MENU”. The following on screen display will appear: The sub menu topics will be displayed.
OPERATING THE RECEIVER 1.2.1 User Mode Select Driving Mode: You have an option to choose the positioner’s movement type: Continuous, Step or Time. Position the antenna with north, south, east and west and use the key to drive motor. key drives to west, key drives to east, key drives to north and key drives...
OPERATING THE RECEIVER 1.5 Manual Scanning To tune-in new channels and weak signals, the STB has been provided with the option “Manual Scanning” where the channel data can be entered by the user. After selecting the “Manual Scanning” from the Installation Menu, the following screen will be displayed: Select the target satellite for manual search.
OPERATING THE RECEIVER 2. Channel Organising The “Channel Organising” menu has seven functions: This menu is for removing some channels from channel list which are related with designated Satellite or Transponder. And it provides making favorite list and moving channel position as you want.
OPERATING THE RECEIVER 2.7 Move & Edit Channel Select the TV/RADIO list with or TV/RADIO key. Select a channel in the TV or Radio list with PG+/PG- keys or numeric keys. Select channel by pressing the RED( i ) key. Press the or PG+/PG- keys to change the position of the channel you want, and press the OK key for confirmation.
OPERATING THE RECEIVER 3.2 Change PIN Code To change the PIN Code, select the second option “Change PIN Code”. This will take you to the following menu: In this option, you need to enter the current PIN Code at the first cursor, and at the second cursor enter the desired PIN Code.
OPERATING THE RECEIVER To set User defined mode or EPG color mode Press the GREEN(TEXT) key. The item which you want to change will appear. Move the item which you want to change using the keys. Set the color you want using the keys.
Or in case you don’t need to update, “You don’t need to update software!” will be displayed. If you get information that a Transponder is changed to different one for Samsung software, you should select ‘User Advanced Mode’ at Menu mode by using the Then you should set exact parameters for the new transponder for Samsung.
TROUBLESHOOTING Problem Possible cause Solution of the problem No display LED on Power cord Power cord plug in correctly the front panel; not plugged in correctly No power supply No pictures on the screen Receiver in Standby mode; Set receiver to “On”; Scart not connected tightly Check connection and correct;...
Page 19
TECHNICAL SPECIFICATIONS A/V output RCA JACK : VIDEO (CVBS), AUDIO R&L RF modulator Modulator output : CH 21_69 (preset to CH 21) Video type : PAL B/G, I, D/K UHF output level : 70 ± 5 dBµV Output connector : IEC male Ant.