Table of Contents
Advertisement
place and secure and saddle is correctly fitted.
16
Check smooth operation of gear change on either
derailleur or hub gear and ensure all gears can be
selected
Ensure side stand supports bike correctly and does
17
not interfere with other moving cycle parts
18
Ensure motor wheel turns smoothly and quietly when
rotated by hand in forward and reverse direction
19
Ensure correct chain tension
20
Ensure chain guard is not rubbing on models
equipped with guard
21
Ensure all reflectors are in place on pedals, wheels etc
Electrical Parts
1
Fit and check correct operation of front and rear
lights
2
Check wiring at front connector box
3
Check throttle returns smoothly to closed position
and plastic spacer is in position
4
Check brake cut-out switches cut power to motor
5
Check functionality of LCD display on 806 bikes
Check functionality of LED display on 705 and 905
6
bikes
7
Check battery locates properly in the lower cradle and
locks in place securely
8
Check alignment and clearance of pedelec sensor
Adjust as necessary
Some additional resistance will
be felt when rotated in reverse
All grommets to be in place and
no bare wires to be visible
Adjust if necessary (see section
in manual)
Includes selection of six power
assist levels, speed readout,
and all functions are correct as
described in the user and
service manual
Ensure six levels of assistance
can be selected and all
functions are correct as
described in the user and
service manual
Ensure three keys are present
with same number
Adjust if necessary (see
manual)
32
Advertisement
Table of Contents
