Hot Surface Indicator; Cooking Areas - Samsung FCQ321HTUB User Manual

Location of the radiant surface elements and controls
The radiant control knobs operate the radiant surface elements on the cooktop as shown below.
1
3

Hot surface indicator

Cooking areas

• The cooking areas on your range are identifi ed by permanent circles on the glass cooking
surface. For the most effi cient cooking, fi t the pan size to the element size.
• Pans should not extend more than ½" to 1" beyond the cooking area.
• When a control is turned on, a glow can be seen through the glass cooking surface. The
element will cycle on and off to maintain the preset heat setting, even at high settings.
• For more information on selecting proper types of cookware, refer to the section "Using the
proper cookware" on page 14.
5 2
4
• Comes on when the unit is turned on or hot to the touch.
• Stays on even after the unit is turned off.
• Glows until the unit is cooled to approximately 150°F.
1. Single element: Left rear
2. Single element: Right rear
. Single element: Left front
. Dual element: Right front
5. Warming center: Center rear
Surface cooking _11