Name Of Each Component And Its Functions - Hitachi Compute Rack 220H Getting Started Manual

Name of each component and its functions

This section describes the name of each component and its functions.
Front side
With Front bezel (AU7705-Y/AU7705-R)
Figure 2-1: CR 220H front side Overview
Table 2-1: CR 220H front side components
Location Name
1 HDD status LED
2 Operation panel
Extension storage
3
bay
Extension storage
4 bays (2.5-inch)
1-8 2
Extension storage
5
bays (5-inch)
6 Bezel indicator
7 Bezel lock
Notes:
1 The LED lights green while the HDD/SSD is being accessed for rebuilding.
2 A dummy tray is installed for an extension bay without an internal HDD/SSD.
2-2
1
4
State
Green-On
Amber-On
Amber-Blink 1
-
-
-
-
-
-
Overview
Hitachi Compute Rack 220H Getting Started Guide
2
5
6
Description
Accessing HDD/SSD.
Error occurred.
On-going data rebuild.
The operation panel has switches to control the system unit
and LEDs for the status of the system unit.
See Operation panel on page 2-3
A DVD-ROM drive is pre-installed in this storage bay.
See Internal DVD-ROM drive
An internal HDD/SSD (2.5-inch) can be installed to an
extension storage bay (2.5-inch).
A removable device can be installed to an extension storage
bay (5-inch).
Indicates the LEDs on the operation panel by lenses.
See Operation panel on page 2-3.
Locking the Front bezel by the lock key.
3
7
on page 2-7.