Table of Contents
Advertisement
3. After installing driver, shut down your computer and insert card. And power on the
computer.
4. The system recognize the Wireless LAN Card.
5. The other procedures are same to 7~15 of
first >
Cf.) The third method :
You can combine 'Method 1' with 'Method 2'. In other words, after inserting
card into the computer, you can install driver and utility by using the installshield
instead, not by the inf file. In case of Windows 2000 and Windows XP, system will
recognize the card automatically during installation .
Notice that if you install a card after removing it in a Device Manager, you have to
mark the check box("Do you want to scan for hardware changes?"). The function is
same to the "Refresh" in ther Device Manager.
3.3 Installation Procedure of Windows ME
Please follow the following steps one by one to install the
< Method 1 - Inserting card first >
1. Insert the
2. Power on your computer and allow Windows ME to load fully.
3. "Add New Hardware Wizard" appeared and the system looks for
Network
device(recommended)" is slected. Insert the MagicLAN Installation CD into the
CD-ROM drive.
MiniPCI/PCI
Card into the slot of your computer.
Controller". Check if "Search for the best driver for your
< Method 1 - Inserting card
MiniPCI/PCI Card
20
successfully.
"PCI
Advertisement
Table of Contents
