Samsung MagicLAN SWL-2210M User Manual page 16

Samsung magiclan user's manual
Hide thumbs Also See for MagicLAN SWL-2210M:
Table of Contents

Advertisement

If screen message 'Do you want to restart your Computer now' will pop up,
select No.
6. After rebooting your computer, right click on the My Computer using the
mouse and click Properties.
7. Check for the SAMSUNG 11Mbps WLAN MiniPCI/PCI Card by clicking on
the Device Manager. If you find the Yellow sign on the adapter, it shows the
installation is not successful. Select the Adapter and click on Remove. Restart
your computer after uninstalling the driver. (See the Adapter Removal in section
3.8)
8. Right click on the Network Neighborhood using the mouse. Select Properties
from the pop up menu. The network box appears and you see three main tabs:
Configuration, Identification and Access Control.
9. Click on the configuration tab and then click on the add button. Select Network
Component Type box appears. Click on the Protocol then click the Add button.
10. Select Network Protocols box appears. From the list of manufactures, click on
Microsoft. From the list of network protocols list, select IPX/SPX and TCP/IP,
then click OK.( If you want, you can install the NetBEUI protocol.)
16

Advertisement

Table of Contents
loading

This manual is also suitable for:

Magiclan swl-2210p

Table of Contents