Custom Brackets Yuri Arcurs SteadyPod Instructions For Use page 2

Attaching the SteadyPod
to a monopod
Place the base on the monopod's ⅜"-16
mounting stud and screw it into the base
until it is firmly attached.
* * * * * Caution * * * * *
If you choose to use a monopod with a ¼"
mounting stud, you will need to purchase
a ⅜" to ¼" reducer bushing and install it in
bottom of SteadyPod's base.
If you choose not to use the Manfrotto 685B
NeoTec monopod, you must unscrew and
remove the (2) monopod anti-twist posts.
Attaching the Foot Shield
to the Manfrotto monopod
(4) Retaining screw
locations
The Foot Shield is shipped assembled to
the monopod.
If removal is necessary, remove the (4)
retaining screws and slide the Foot Shield
up, then remove the rubber foot followed by
the Foot Shield.
Assemble in reverse order. Make sure that
the rubber foot sticks out evenly from the
Foot Shield.
The SteadyPod has many unique features. It is constructed from anodized aircraft aluminum for a lightweight, scratch-resistent finish. The tilt head has separate lock and drag knobs for better control and are captive to prevent
loss. All of the fasteners are made from stainless steel to resist corrosion and black oxided for appearance. The monopod base has (2) removable anti-twist posts designed to fit the Manfrotto 685B NeoTec monopod.
For a period of five (5) years from date of purchase, Custom Brackets will repair or replace free of charge, any defect in material or workmanship. Warranty does not cover repairs due to abuse, negligence, impact or any
modifications made by the customer. Excessive force unscrewing knobs will void warranty. Warranty service is available by returning the SteadyPod (shipping prepaid) to Custom Brackets. All returns must include a return
authorization (RA) number (contact Custom Brackets to obtain), letter explaining the problem, and a copy of the sales receipt. Contact Manfrotto for Manfrotto 685B monopod warranty.
For a period of five (5) years from date of purchase, Custom Brackets will repair or replace free of charge, any defect in material or workmanship. Warranty does not cover repairs due to abuse, negligence, impact or any
modifications made by the customer. Excessive force unscrewing knobs will void warranty. Limitation to the warranty - after year one shipping charges are not covered. Warranty service is available by returning the
SteadyPod (shipping prepaid) to Custom Brackets. All returns must include a return authorization (RA) number (email info@custombrackets.com to obtain), letter explaining the problem, and a copy of the sales receipt.
Contact Manfrotto for Manfrotto 685B monopod warranty.
Repair service is available by returning the SteadyPod (shipping prepaid) to Custom Brackets. All returns must include a return authorization (RA) number (contact Custom Brackets to obtain), letter explaining the problem, and
a copy of the sales receipt. A repair cost will be issued and must be approved prior to any repairs. Shipping charges are the responsibility of the customer.
The SteadyPod is designed completely maintenance-free. The bearing rotation tension is factory set. Attempting to adjust the tension will void the warranty and may result in damage to the camera.
Base
(2) Monopod
anti-twist posts
Foot Shield
SteadyPod Facts
USA 5 Year Warranty
International 5 Year Limited Warranty
Repair
Maintenance
- - - SteadyPod Features - - -
Tilt drag knob
Tilt
Side view of Tilt Head and
Digital PRO-SV
Rotate to
vertical
Quick Release
push bar
Tilt lock knob
Rotate knob
counter-clockwise
to tighten