Philips EasySense Design Manual
Luminaire-mount.
single, compact,
cost-effective
luminaire control
Hide thumbs
Also See for EasySense:
- Quick installation manual (2 pages) ,
- Quick installation manual (2 pages) ,
- Manual (12 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Manual
Advertisement
Table of Contents
Related Manuals for Philips EasySense
Summary of Contents for Philips EasySense
-
Page 1: Philips Easysense Luminaire-Mount Sensors
Sensors EasySense Luminaire-Mount Design-in Guide Single, compact, cost-effective luminaire control Philips EasySense luminaire-mount sensors May 2016... -
Page 2: Table Of Contents
Contents Philips EasySense luminaire-mount sensors Phone-based app and configuration The Philips Field App for the EasySense sensors Introduction to this guide Configuration steps More information or support Mechanical design-in Warnings and instructions Mounting to a luminaire Wiring diagram with Philips Xitanium SR driver... -
Page 3: Introduction To This Guide
Introduction to this guide Thank you for choosing the Philips EasySense sensor. In this guide luminaire manufacturers will find the information required to design this product into a luminaire and configure it to suit specific applications. This design-in guide covers... -
Page 4: Warnings And Instructions
Warnings and instructions • EasySense must be used only with Philips Xitanium SR LED driver. • The sensor is powered by a SR driver with a FELV voltage 16-22V and should have at least basic insulation. • Do not apply mains power directly to the sensor. -
Page 5: Introduction Of Easysense
OEM luminaire assembly. EasySense operates with the established Philips Xitanium SR LED driver standard to make a simple two-wire connection between sensor and driver, thus eliminating the need for multiple components and auxiliary devices. -
Page 6: Product Characteristics
NFC (near field communication) using a smart phone Therefore, it is recommended not to use EasySense with the EasySense app. NFC is the set of protocols in outdoor, parking or industrial applications. that enables electronic devices to establish radio... -
Page 7: Sensor View Shield
The by the sensor in a certain area. The shield comes optimum distance [Y] from the window to EasySense inverted. (See Figure 2.) This view shield can be can be obtained from Figure 4. This graph shows the... -
Page 8: System Startup Behavior And Auto-Calibration
• Light dims down to the task level that meets the set point. Warning: Make sure no objects are blocking the sensor’s view and no surface reflectance changes occur in the sensor’s view during auto calibration. Design-in Guide - Philips EasySense luminaire-mount sensors May 2016... -
Page 9: Lighting Control
100%, or the field task level if set lower than 100%. Background level is a light level lower than 100%, used to save energy when space is not occupied. May 2016 Design-in Guide - Philips EasySense luminaire-mount sensors... -
Page 10: Occupancy-Based Lighting Control
(con gurable) Switch On sequence Switch O sequence Lighting control overview EasySense controls the light output based on the occupancy, daylight regulation and field task level. When both occupancy- and daylight-based lighting control are enabled, the light level is determined by the lowest light level of the following: •... -
Page 11: Low Daylight Level
Figures 6 and 7 show examples of lighting control Occupancy-based lighting control is enabled by using both daylight and occupancy. When the default for the EasySense, and it can be daylight level is low (Figure 6) and an occupant is disabled using an app through NFC. -
Page 12: High Daylight Level
(light level too high). Task light level can be adjusted by the installer or building maintenance personnel to a value between 5% and 100% of the max setting through the app. Design-in Guide - Philips EasySense luminaire-mount sensors May 2016... -
Page 13: Phone-Based App And Configuration
The Philips Field App for the EasySense sensors works only on Android-based smart phones. Please check the EasySense website for the latest list of compatible phones and their NFC reader locations. The app can be downloaded from the Google Play store. - Page 14 6. After programming successfully, a green arrow shows on the screen. More sensors can be programmed with the same setting by pressing “Program EasySense” again. Or press “Done” to finish configuration. Design-in Guide - Philips EasySense luminaire-mount sensors May 2016...
- Page 15 This feature only works after the system has been powered for at least one hour. May 2016 Design-in Guide - Philips EasySense luminaire-mount sensors...
-
Page 16: Mechanical Design-In
Max sheet metal thickness is 1 mm. 2. Mounting to rectangular cut-out Another option is attaching EasySense to a cutout in the sheet steel. An additional mounting bracket is used to snap to the EasySense. -
Page 17: Wiring Diagram With Philips Xitanium Sr Driver
GNDset Strip wire to 8 mm. LINE Connectors NFC ANTENNA (non-polarized) Figure 8. Wiring diagram with Philips Xitanium SR driver. Xitanium LED SR driver EasySense Figure 9. Sensor in a luminaire. May 2016 Design-in Guide - Philips EasySense luminaire-mount sensors... -
Page 18: Wire Strip Length
≥ 1.5 m 5°~ 7° Angle Max [ Inserting solid conductors via push-in terminal ] Wire separation from the connector Figure 10. Distance between sensors should be at least 1.5 m apart. Design-in Guide - Philips EasySense luminaire-mount sensors May 2016... -
Page 19: Easysense With Multiple Sr Drivers (1:N Application)
MultiOne configurator. For this application, please also make sure all drivers that are connected to the sensor have the same wiring polarity. SR Drivers are shipped with the power supply on as default. May 2016 Design-in Guide - Philips EasySense luminaire-mount sensors... -
Page 20: Faq
Does EasySense work on 1 - 10 V or DALI drivers? No. EasySense works on Philips Xitanium SR LED drivers to enable two-way digital communi cation directly to the driver and to eliminate need for other auxiliary devices. Can you use a wall dimmer with EasySense? Models are in development to support wireless switches and dimmers. - Page 21 Also, the relay- free operation of EasySense makes it inherently more reliable. And traditional occupancy sensors are bulky compared to the compact size of EasySense. How does the daylight harvesting feature work? EasySense does auto-calibration when the luminaire is first powered.
-
Page 22: Contact Details
Contact details Philips EasySense Product information: www.philips.com/technology. Or contact your local Philips sales representative. Design-in Guide - Philips EasySense luminaire-mount sensors May 2016... -
Page 23: Disclaimer
Philips will not be liable for any indirect, special, incidental or consequential damages (including damages for loss of business, loss of profits or the... - Page 24 © Philips Lighting Holding B.V. 2016. All rights reserved. Philips reserves the right to make www.philips.com/technology changes in specifications and/or to discontinue any product at any time without notice or www.philips.com/fortimo obligation and will not be liable for any consequences resulting from the use of this publication.