Connecting an External Analog Component
Example: Analog signal components such as a VCR or TV.
1
Connect Audio In on the Home Theater to Audio Out on the external analog component.
•
Be sure to match connector colors.
2
Press AUX on the remote control to select AUX.
•
Each time the button is pressed, the selection changes as follows: USB
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD
•
To listen to the audio from the TV in 5.1 channel through the main unit, press the Dolby Pro
Note
Logic II or the SUPER 5.1 button.
•
You can connect Video Output jack on the VCR to the TV, and connect Audio Output jack on
the VCR to this product.
Audio Cable (not supplied)
If the external analog component has only
one Audio Out, connect either left or right.
D.IN 1
D.IN 2
AUX
D.IN 1
D.IN 2
AUX.
USB
FM.
ENG
22