To Edit An Arbitrary File; To Edit A File Based On An Address In The Entry Buffer; To Edit A File Based On The Current Program Counter - HP B1476 68020 User Manual

To edit an arbitrary file

1 Select File→Edit→File.
2 Using the file selection dialog box, enter the name of the file you wish to edit;
then, click on the OK pushbutton.
After editing the file, you quit the edit session by the standard method for the
editor used.
To edit a file based on an address in the entry
buffer
1 Place an address reference (either absolute or symbolic) in the entry buffer.
2 Select File→Edit→At () Location.
The interface determines which source file contains the code generated for the
address in the entry buffer and opens an edit session on the file.
To edit a file based on the current program
counter
• Select File→Edit→At PC Location.
The interface determines which source file generated the address currently in
the program counter and opens an edit session on that source file. The
interface will issue an error if it cannot find a source file for the address in the
PC.
Chapter 7: Editing Code and Data
To edit an arbitrary file
209