Chapter 4: Loading and Executing Programs
Stepping Through and Running Programs
You can also use function key F8 to step over functions.
To run from the current PC address
• Click on the Run action key.
Or:
• Select Execution→Run→from PC.
Or:
• Using the command line, enter:
Program Run
And press the < Return> key.
The program runs until:
•
•
•
•
•
You can run from the current program counter address to resume program
execution after the program has been stopped.
To run from a start address
1 Enter the start address into the entry buffer.
102
The program encounters a permanent or temporary breakpoint.
An error occurs.
A STOP instruction is encountered.
You press < Ctrl> -C.
The program terminates normally.