DIGITAL VIDEO RECORDER DVR COMBO User’s Manual CLASS A (For Business) To use this product safely, have to read “Important Safety Introductions”, and then be well aware of the contents.
DIGITAL VIDEO RECORDER CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside.
3. System Connection for Alarm Recording 4. Connection with PC for Use III. Basic Method to use 1. Booting the System 2. Basic Screen Viewing IV. DVR Menus 1. Menu View 2. Setting of Date, Time and Screen 3. Record Setup 4. Alarm Record Setup 5.
DVR COMBO can play while recording sound and image simultaneously. The system and camera can be monitored and controlled from a remote PC. Together with Samsung Multiplexer, the system can backup only desired image per each channel. Features Data on your hard disk can easily be backed up onto video tapes.
Locks all keys during recording to prevent accidental REC LOCK REC LOCK operation of the unit. If the VCR LED is on, the system is in VCR mode and if it is off, the system is in DVR mode. SEARCH MENU REC LOCK ARCHIVE...
DIGITAL VIDEO RECORDER Back View Name POWER Power On/Off switch. The inlet for connecting the power cord. AC IN NTSC (AC 110 ~ 240V, 60 Hz) PAL (AC 220V, 50Hz) Dip switches for setting the system ID, serial communication, MODE and termination.
Use to check the video tape backup. p 5-13 Takes you to DVR INPUT for p 4-7 selecting a DVR input signal. Use to rewind or to sequentially view still frames in reverse order during p 7-13 DVR/VCR playback.
If you want to use a hard drive from another machine, be sure to format it from a PC before using it. The system may not work normally if you use it without formatting it first. Hard disk drives recommended for use with the DVR COMBO are Samsung Spinpoint SV0802N and SEAGATE Barracuda 7200.7 80G.
30 FPS (for NTSC) or 25 FPS (for PAL). In this case, set the output mode of the multiplexer to Frame- Mode or adjust the field recording rate of the DVR to 60 FPS (for NTSC) or 50 FPS (for PAL).
DIGITAL VIDEO RECORDER System Connection for Alarm Recording <Rear Side Connection Terminal of DVR COMBO> ALARM IN ALARM RESET TRIGGER IN ALARM OUT ALARM IN ALARM CANCEL TRIGGER OUT ALARM OUT REC IN DISK END Alarm recording is a function for recording the input video when an alarm signal is input while a device with alarm output is connected to this unit.
Page 13
Transmission speed: 4800, 9600, 19200, 38400, 115200 bps B. RS-485 terminal and Pin specifications DATA - DATA + DATA - DATA + C. Data Format (Samsung Protocol) 9 Byte Fixed Start Code (A0H) Start Addr. Target Addr. Data Byte Type...
When this occurs, power-down the system and connect an NTSC signal to the input. The system then initializes to NTSC signals on power-up. On the other hand, the SCR-3000P system only recognizes PAL signal inputs. Please connect the video signals appropriate for each model.
DIGITAL VIDEO RECORDER Basic Screen Viewing Viewing Full Screen Here comes the description of all the icons and status in the screen. 2003-06-25 04:30:00 ❿ 2003-06-24 00:23:44 If system is in the recording state icon will blink. However, it does not blink in the Live Screen state.
Page 17
DIGITAL VIDEO RECORDER Live Screen Viewing The normal Live screen looks like this. 2003-06-25 04:30:00 If system is in the recording state icon will blink. However, it does not blink in the Live Screen state. Indicates whether a HDD is installed or whether the hard drive rack is locked. It shows the relative location of the recorded data inside the hard disk.
Page 18
DIGITAL VIDEO RECORDER Playback screen Viewing The normal Playback screen looks like this. ❿ 2003-06-24 00:23:44 The upper pointer shows the relative location of the recorded data being stored inside the hard disk and the lower pointer shows the relative location of the data currently being played back.
DIGITAL VIDEO RECORDER Menu View Entering the DVR MAIN MENU MENU Press the MENU ( ) button. Then the following screen should appear. MAIN MENU(DVR) CLOCK/DISPLAY MODE SETUP RECORD MODE SETUP ALARM RECORD SETUP TIMER RECORD SETUP SYSTEM SETUP COMMUNICATION SETUP MOVE=[ / ❷...
Page 21
DIGITAL VIDEO RECORDER Example of menu setting (in case of changing time) Press the MENU button and then press the ENTER( points out the CLOCK/DISPLAY MODE SETUP. Then following screen appears. CLOCK/DISPLAY MODE SETUP DATE 2003-06-01 SUN TIME 12:00:00 DATE DISPLAY TYPE YYYY-MM-DD DATE &...
HDD ERASE FACTORY RESET MENU SCREEN DARK GRAY LANGUAGE ENGLISH IR REMOCON MULTIPLEXER WITHOUT MULTIPLEXER SELECT SAMSUNG SDM-160 ➛ ❿ MOVE=[ / ❷ ] SELECT=[ ] EXIT=[MENU] Caution Caution Upon shipment from the factory, the values of the menu are set as follows.
Note Note Set DVR input to VCR PB mode to show video in live video on screen. You can record the videotape into hard disk drive while playing it. Note that OSD will not display while recording. This is normal.
DIGITAL VIDEO RECORDER Note Note The following table shows how long it would take to fill up an 80GB HDD for each field rate. (Recording time for each field rate may slightly vary depending on the type of input video singal.) Time-Lapse Mode VERY HIGH HIGH...
Page 25
Alarm Occurrence PRE ALARM TIME LIMIT MAIN ALARM TIME MAIN ALARM PICTURE RATE Set the main alarm recording field rate. (SCR-3000P models supports recording from 0.50 FPS (Fields Per Second) up to 50 FPS) SCR-3000N/SSC-Dual (NTSC) [60.00FPS/30.00FPS/15.00FPS/10.00FPS/7.50FPS/5.00FPS/2.50FPS/1.00FPS/ 0.50FPS] SCR-3000P (PAL) [50.00FPS/25.00FPS/12.50FPS/8.33FPS/6.25FPS/5.00FPS/2.50FPS/1.00FPS/...
FIELD RATE can also be set from 0.50 FPS up to 60 FPS (0.50 FPS to 50 FPS for the SCR-3000P model). Once the timer recording is set, the recording will be made on the corresponding day for the duration of entered time. Other recording settings, except the field rate, follow the basic recording settings.
[DARK GRAY/OFF] 4-15 LANGUAGE SCR-3000N/SSC-Dual models only supports English. SCR-3000P models however supports German, French, Spanish, and Italian in addition to English. There is a language support setting function for the convenience of international users. The default language is set to English.
But, this remote control shall be applied only to SEC SCC-641/SCC-643(N/P) Cameras and SCC-421(N/P) Series Camera(C4201, C4203, C4301 and C4303) Camera which use the SAMSUNG Protocol. You can select the camera to be controlled by the remote monitoring program. Please refer to Remote Monitoring Program Use’s Manual for the detailed explanation of the remote monitoring program.
- Make sure that the VCR LED is lit before pressing the MENU button. If the VCR button had not been pressed, the DVR MAIN MENU will be displayed. - Record or Play mode, you cannot go into the menu. To go into the menu, first stop recording or playback.
DIGITAL VIDEO RECORDER MANUAL ARCHIVE The following illustration shows the initial settings of the MANUAL ARCHIVE menu. MANUAL ARCHIVE FROM RECORD EVENT LIST FROM ALARM EVENT LIST FROM MOTION EVENT LIST TIME RANGE DIRECT ARCHIVE PICTURE SAMPLING RATE 1/1 ➛ ❿...
Page 31
2003-06-14 09:45:45 Note Note - If MULTIPLEXER in the SYSTEM SETUP menu of the DVR MAIN MENU is set to WITH, MOTION EVENT ARCHIVE will be disabled. To perform the backup, set MULTIPLEXER in the SYSTEM SETUP menu to WITHOUT.
Page 32
2003-06-14 09:45:45 Note Note - Even if you locate the desired scene and play it back in DVR mode for DIRECT ARCHIVE, playback will stop as soon as you press the VCR button. (6) PICTURE SAMPLING RATE PICTURE SAMPLING RATE allows you to reduce the picture sampling rate by a fraction- al number when backing up the hard drive to a video tape.
ARCHIVE set time ends, even if the record event is not finished. Note Note - If MULTIPLEXER in the SYSTEM SETUP menu of the DVR MAIN MENU is set to WITH, the MOTION event type will be disabled for SELECT EVENT of the TIMER ARCHIVE menu.
SP. SCR-3000N/SSC-Dual [SP/SLP] SCR-3000P [SP/LP] Note Note - Recording Time to Recording Mode SCR-3000N/SSC-Dual (NTSC, based on T-120) SCR-3000P (PAL, based on E-180) 5-11 2 Hours 6 Hours 3 Hours 6 Hours (3) TAPE SELECT Set the tape length for accurate calculation of remaining tape time and precise control.
The ARCHIVE CHECK will start and the following screen will appear. ARCHIVE CHECK In the above screen, signals from the DVR are being recorded on the VCR for about 5 sec- onds. After about 5 seconds, icon will appear at the top left corner of the screen and the VCR will rewind to the start point of the most recently recorded images.
DIGITAL VIDEO RECORDER Basic Record Basic Record CURRENT IMAGE RECORD Press the RECORD( ) button to record current image. If doing so, the light of the RECORD( ) button turns on and record starts while following message appears on the screen. Settings related with record are done in the RECORD MODE SETUP menu. 2003-06-01 12:00:00 O RECORD ON O Note...
There is an alarm input terminal (ALARM IN) on the external I/O port at the back panel of the DVR COMBO system. Connect here the alarm output terminal of an external device, such as Multiplexer. (For detailed information on connections, please refer to “3. System Connection for Alarm Recording”...
DIGITAL VIDEO RECORDER Reservation Record Reservation Record Setup You can enter the day, time, and field rate for the timer recording in the TIMER RECORD SETUP menu so that the recording will be made on the set day for the set amount of time. Reservation Record Cancel If the system is not in the timer recording mode, in order to cancel the timer recording, set the TIMER row of the line you want to cancel to OFF in one of the timer recording list set...
DIGITAL VIDEO RECORDER Search Menus Entering the DVR SEARCH MENU SEARCH To search the recorded data, press the SEARCH ( should appear. SEARCH MENU DATE & TIME SEARCH RECORD EVENT SEARCH ALARM EVENT SEARCH MOTION EVENT SEARCH PB CHANNEL SETUP...
DIGITAL VIDEO RECORDER Retrieval by Date and Time DATE & TIME SEARCH DATE&TIME 2003-07-10 13:37:48 [SEARCH START] ➛ ❿ MOVE=[ / ❷ ] SELECT=[ ] EXIT=[SEARCH] Enter the date and time you want to search, place the cursor at SEARCH START, and then press the ENTER ( ) button.
RIGHT( ❿ ) button to move to the next page. - In DVR MENU, if MULTIPLEXER of SYSTEM SETUP is set to WITH, MOTION EVENT SEARCH of SEARCH MENU will be disabled. ➛...
Set the channel to ON to show it or set the channel to OFF to hide it. Note Note If MULTIPLEXER in the SYSTEM SETUP menu of the DVR MAIN MENU is set to WITHOUT, PB CHANNEL SETUP will be disabled. SYSTEM INDICATION The following screen appears when you select SYSTEM INDICATION.
Page 44
DIGITAL VIDEO RECORDER (2) SYSTEM INFORMATION The following illustration shows the initial settings of the SYSTEM INFORMATION menu. SYSTEM INFORMATION HDD1 CAPACITY(GB) 80.00 OVERWRITE(#) 00000 VERSION SCR3000 V1.00 MAC ADDRESS 00-00-F0-XX-XX-XX EXIT=[SEARCH] It displays the basic system information. If DISK END MODE in the RECORD MODE SETUP menu and the hard drive's capacity (GB: Gigabyte) are set to OVERWRITE, you can tell from the information shown in the CAPACITY(GB) and OVERWRITE(#) fields the number of times the hard drive has been overwritten.
DIGITAL VIDEO RECORDER Basic Playback To immediately play back the data recorded on the HDD, press the PLAY/STILL( The following screen will appear and the beginning of the recorded data will be played back in turn. O PLAY O ❿ 2003-06-01 12:00:00 Note Note...
DIGITAL VIDEO RECORDER VCR Playback Take following steps to play recorded videotape. Insert the videotape into deck. Turn VCR LED by pressing VCR button ( ) once. Then press PLAY/STILL( Note Note - You can play video whether the system is in live screen mode or recording mode. - Pressing the PLAY/STILL( ❿...
The REPEAT function can be operated from the remote control only. (1) DVR A-B Repeat Playback During DVR playback, press the REPEAT button at the start point of the section you want to play back repeatedly. At this time, "REPEAT" blinks on the bottom left part.
DIGITAL VIDEO RECORDER Product Standards Rated Voltage NTSC (AC 110 ~ 240V, 60 Hz), PAL (AC 220V, 50Hz) Power Consumption Removable HDD 80GB BACKUP VCR VIDEO TAPE Video Input Composite Video, BNC Jack - 1CH (1.0 Vp-p, 75 ) S-VHS VIDEO Video Output Composite Video, BNC Jack - 1CH (1.0 Vp-p, 75 ) S-VHS VIDEO...
– Appropriate input signals need to be connected for each model. Connect NTSC signals to the SCR- 3000N/SSC-Dual model and PAL signals to the SCR-3000P model, otherwise video output may be disrupted. – Make sure that the path between the remote control and the IR sensor is not obstructed.
Page 52
DIGITAL VIDEO RECORDER Q & A Question • Does recording continues after power cut – Without power supply, the system can't perform during recording. recording. But if the system was recording before power cut, it will resume recording upon power sup- ply.