Siemens DQ 16x24VDC/0.5A HF User Manual page 33

Technical specifications
Article number
Potential separation
Potential separation channels
between the channels
•
between the channels, in groups of
•
between the channels and backplane bus
•
Isolation
Isolation tested with
Standards, approvals, certificates
Suitable for safety-related tripping of standard
modules
Highest safety class achievable for safety-related
tripping of standard modules
Performance level according to ISO 13849-
•
1
Category according to ISO 13849-1
•
SILCL according to IEC 62061
•
Ambient conditions
Ambient temperature during operation
horizontal installation, min.
•
horizontal installation, max.
•
vertical installation, min.
•
vertical installation, max.
•
Decentralized operation
Prioritized startup
Dimensions
Width
Height
Depth
Weights
Weight, approx.
Residual current at signal state "0":
Note
Due to the Diagnostics: Wire break function, there is a low level of residual current in the "0"
signal state at the output, which may cause the display diodes to flicker.
This residual current does not depend on the setting for the wire break diagnostics
parameter.
32
6ES7522-1BH01-0AB0
No
8
Yes
707 V DC (type test)
Yes; From FS02
PL d
Cat. 3
SILCL 2
0 °C
60 °C
0 °C
60 °C
Yes
35 mm
147 mm
129 mm
230 g
Digital output module DQ 16x24VDC/0.5A HF (6ES7522-1BH01-0AB0)
Manual, 06/2018, A5E35683409-AC