4.2 TYPICAL WIRING DIAGRAM
As every system has different requirements, these diagrams show only a TYPICAL system and do
not intend to show a complete system.
Genset manufacturers and panel builders may use these diagrams as a starting point; however, you
are referred to the completed system diagram provided by your system manufacturer for complete
wiring detail.
Further wiring suggestions are available in the following DSE publications, available at
www.deepseaplc.com to website members.
DSE Part
Description
056-022
Breaker Control (Training guide)
057-004
Electronic Engines and DSE Wiring
NOTE: Connection for an AVR on terminals 37 and 38 are only available on module's
version 2 and upwards.
Installation
44
Need help?
Do you have a question about the DSE7450 and is the answer not in the manual?
Questions and answers