Spot Ae Point - Samsung Pro 815 User Manual

Spot AE (Auto Exposure) point
You can select a spot AE point where the brightness is calculated.
How to set the spot AE point in the Program mode
1. Select the spot metering mode (p.43).
2. Press the Menu button and select the [P] menu tab.
3. Press the Right button and select the [Spot AE point]
menu by pressing the Up/ Down button.
4. Press the Right button and select a desired menu
by pressing the Up/ Down button.
- [Center] : The brightness is calculated based on
the + marked area placed on the centre
of the Rear LCD. Select this menu when
the subject is in the backlight shooting
condition or in the shadow.
- [Focus Area] : The brightness is calculated based on where the auto focus frame is placed.
If there is a gap of brightness between the subject and centre part of the LCD,
select this menu. Refer to page 46 for more information about how to set the
Spot AE point. It is the same as those for AF-A setting up.
5. Press the OK button to set the setting.
Flash Synchro.
Flash Pop-up
Direct MF

Spot AE point

Center
Focus Area
Size
Quality
Effect
79