ABB ACS800 User Manual page 3

2 — Starting and Running the Program
Software Required
Files Provided
Installation
Opening the Workbook
Microsoft® Excel 97 or later is required to run the energy calculation
workbook. The user should have some familiarity with Microsoft Excel.
The PumpSave files for pump drive calculations are incorporated into Excel
workbook named originally PumpSave4.1.xls.
No installation is required but the workbook is can be copied to a hard disk and
short-cut arranged to desktop.
Start Excel as usual. For pump calculations open PumpSave4.1.xls.
PumpSave will open in Full Screen mode. Hence, the usual Excel toolbars are
not visible. Full Screen mode can be disabled and enabled by selecting Full
Screen from the View menu.
As PumpSave is opened, a welcome window is displayed. Figure 1 shows the
welcome window for PumpSave. The welcome sheet presents three
comparative calculation options. Click Continue to close the window.
Figure 1 Welcoming window of PumpSave
Then also a long license agreement text is shown.
3