Beep
■ If you set the operation sound to ON, various sounds will be activated for camera startup,
when button are pressed, and if there is a card error, so that you can be aware of the camera
operation status.
● Setting Operation Sounds
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [BEEP] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[BEEP] sub menu : OFF/ON
5. Press the menu button twice and the menu will disappear.
Selecting an External Device (USB)
■ You can select an external device to which you want to connect the camera using the USB cable.
● Selecting an External Device
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [USB] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[COMPUTER] : Select this if you want to connect the camera to your PC.
[PRINTER]
5. Press the menu button twice and the menu will disappear.
Refer to page 95 for instructions on how to connect the camera to your
PC.
: Select this if you want to connect the camera to your printer.
Refer to page 63 for instructions on how to connect the camera to your
printer.
◀
2048
SETUP
DATE TYPE
OFF
IMPRINT
BEEP
ON
BACK:
◀
SET:OK
◀
2048
SETUP
IMPRINT
COMPUTER
BEEP
PRINTER
USB
◀
BACK:
SET:OK
《75》
▶
▶