Samsung 3500 User Manual page 55

Shooting
INFORMATION
Continuous and AEB shots cannot be selected in the TIFF image quality format.
To take the continuous shot, the number of available shots must be more than 2 because
the minimum number of the continuous shots are 2. To take the AEB shots, the number of
available shots must be more than 3 because of the same reason.
Camera shake can be a problem when using the AEB shooting mode and it takes time to
store the AEB image to the memory. We recommend using a tripod.
ISO
You can select the camera's sensitivity to light by selecting the ISO sub menu. The speed or specific
light-sensitivity of a camera is rated by ISO numbers.
1. Rotate the mode dial to the RECORDING mode and press the MENU button.
2. Press the DOWN button and the cursor will be shifted to the main menu.
3. Select the [SHOOTING] menu by pressing the UP/DOWN button.
4. Press the DOWN button on the [SHOOTING] menu and the next menu page will be displayed.
5. Select the [ISO] menu by pressing the UP/DOWN button.
6. Press the RIGHT button and the cursor will shift to the [ISO] sub menu.
7. Select the desired sub menu by pressing the UP/DOWN button.
- AUTO : The camera's sensitivity is automatically
- 100/ 200/ 400 : In the same lighting conditions, the higher the
8. Press the OK button to confirm the setting.
Press the menu button twice and the menu display will disappear. Take a picture.
INFORMATION
The higher the number, the more sensitive it is to light. As with film, the higher speeds
usually induce more electronic noise so the image gets grainier.
When the power is turned off, the changed setting value returns to the initial value.
[AUTO] is not applied to A/S/M mode.
changed by variables such as lighting value or
subject brightness.
ISO value is, the faster the shutter speed will
be. However, the images can be saturated in very bright conditions.
PROG SETUP MyCAM
ISO AUTO
W.B 100
EFFECT 200
SHARP 400
SET:OK
BACK:
55