Control Module; Power Protection; Power Consumption Control; Omap5912 Dual-Core Processor - Hytera PD505 Service Manual

VHF (136-174 MHz) Circuit Description
On-Off/Volume Control knob is on, SW- and SW+ are at high level, and the radio powers up. After
power-on, Pwr_Hold goes to high level, and Pwr_Key_Det goes to low level.
During power-off, SW- is at low level, while Pwr_Key_Det is at high level. The system detects power-off
procedure via Pwr_Key_Det and implements the power-off procedure. Then Pwr_Hold and SW+ go to
low level, and the power is cut off.

Power Protection

Power protection includes over-current, reverse-voltage and ESD protection.

Power Consumption Control

OMAP can control and configure the power supply and working mode of the peripheral modules (RF
section and baseband section) via the I/O interface and serial bus, so as to reduce power consumption.
5.1.2

Control Module

OMAP5912 Dual-core Processor

The radio uses the dual-core processor OMAP5912, which is mainly composed of ARM926EJ-S and
TMS320C55xx. ARM926EJ-S is the main controller, while TMS320C55xx is used for
modulation/demodulation and voice encoding/decoding.
11