Step
Task (continued)
Attach the brackets to the PSU sides of the system using four screws for each bracket. Attach the bracket so that
2
the "ear" is parallel to the PSU and the outside of the system.
Install the System into a Two-Post Rack or Cabinet
Ensure that there is adequate clearance surrounding the rack or within the cabinet to permit access and
airflow.
To install a system into a two-post 19-inch equipment rack using the already attached mounting brackets,
follow these steps:
Step
Task
NOTE: Dell Force10 recommends using one person to hold the S4810 chassis in place while
another person attaches the brackets to the posts.
20
|
Install the S4810
View from chassis I/O side
View of chassis PSU side
Power Supply
Connect to
Rack/Cabinet
(ears)
Screws
Screws
Connect to
Rack/Cabinet
(ears)