Mercedes-Benz Wallbox Home Installation Manual page 17

The supply cable for the three-phase model variant A0009067408 must be connected as follows:
Designation
Phase 1 current-carrying conductor
Phase 2 current-carrying conductor
Phase 3 current-carrying conductor
Neutral
Protective earth
The supply cable for the single-phase model variant A0009067508 must be connected as follows:
Designation
Current-carrying conductor
Neutral
Protective earth
DANGER!
Please note that the electronic components of your Wallbox will be damaged if you apply a voltage above 250 V between
the L1 current-carrying conductor and neutral.
PLEASE NOTE!
If desired, the 3-phase model variant A0009067408 can also be connected and operated on a single phase at terminal 2
(L1): However, in this case the rated output for the Wallbox will not be achieved.
In case of an unbalanced load on the supply grid, please observe the technical requirements for installation in force lo-
cally. The Mercedes-Benz Wallbox Home is equipped with a symmetry monitoring function that can be activated using the
coded rotary switch. Please find additional information in section "Setup and test modes" on page 15.
PLEASE NOTE!
In some countries, the requirements mentioned in this manual differ from the prerequisites for connecting to the local
power grid. In this case, the Wallbox must be connected in accordance with the respective type of mains power connec-
tion for the country of installation. You can find an overview of country-specific mains connection schemes on page 28
in this manual or on the www.yourwallbox.de website via the following link:
www.yourwallbox.de/downloads/documents/Mains_Connection_Schemes_Home_Advanced.pdf
L3 L2 L1
Conductor color
Brown
Black
Gray
Blue
Green-Yellow
Conductor color
Brown
Blue
Green-Yellow
Mercedes-Benz Wallbox Home
PE
N
Connection coding
5 (L1)
3 (L2)
1 (L3)
N
PE
Connection coding
5 (L1)
N
PE
| Preparations, installation and taking into operation 13