Table of Contents
Advertisement
How to use the PoweREC:
◆ Charging: Please connect the recorder to the PC or any USB power source to
charge it. When the device is charging, the blue light indicator keeps flashing.
The 4 blue led lights will flash intermittently during charging, indicating the
actual level of the battery. The recorder is fully charged when the lights stop
flashing and remain lit.
How long does it take to charge when battery is fully drained?
• using a 5V/2A output power (see the label of your charger) – 3 hours
• using a 5V/1A output power (see the label of your charger) – 6 hours
The PoweREC battery can last up to 380 hours on a full battery cycle.
NOTE! The recording function is available even when used simultaneously
as a power bank to charge other devices. However, due to power
consumption, the battery will drain faster than the 380 hours mentioned.
If the blue indicator light flashes during recording, it means the power is not
enough. The power indicator light will automatically go out after 40 seconds. To
shut it sooner, short press the power button twice.
When battery level is low you can connect the recorder to power source as it will
record and charge simultaneously.
Important: during recording, the removable disk icon will not appear on PC. To
access the partition, please TURN OFF the recorder.
◆ Time setting:
When you connect the power bank to your computer you will be able to access
its partition to find the folder RECORD.
In the folder RECORD, there is a text file named time.txt with the default time
- Quick Links:
- Main Functions
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the PoweREC and is the answer not in the manual?
Questions and answers
Bonjour, le voyant rouge et vert ne s'allume plus. le PC ne reconnait plus le powerREC. le chargement de la batterie fonctionne
The document does not mention red and green lights for the aTTo Digital PoweREC. However, if the PC is not recognizing the device, possible reasons include:
1. The “Recording ON/OFF” button might be set to OFF.
2. The device might not be properly charged. Ensure the blue LED light is on when connected to a USB charger.
3. The USB port might be unavailable if the computer is in standby mode. Try using a different USB charger or port.
4. The recorder’s memory might be full. If the blue light blinks very fast, connect it to a computer and delete or move files.
If the issue persists, contacting aTTo Digital Customer Support is recommended.
This answer is automatically generated