Interconnection Diagram For The Xpp-5 - Siemens milltronics MFA 4P Instruction Manual

Interconnection Diagram for the XPP-5

NON - HAZARDOUS LOCATION NON - HAZARDOUS LOCATION
MILLTRONICS
CONTROLLER
MILLTRONICS
CONTROLLER
NOTES :
1) THE XPP-5 CABLE MUST BE TERMINATED IN AN AREA EXTERNAL
TO HAZARDOUS LOCATIONS, CLASS I, DIV 1, GR.
2) A SEAL SHALL BE INSTALLED WITHIN 50 mm OF THE XPP-5 CONDUIT HUB
FOR CLASS I, DIV. 1 HAZARDOUS LOCATION ONLY.
3) INSTALLATION SHALL BE DONE IN ACCORDANCE WITH
CANADIAN ELECTRICAL CODE PART 1 REQUIREMENTS.
4) DO NOT EXPOSE THE XPP-5 TO DIRECT SUNLIGHT, OTHERWISE
PROVIDE SUN SHIELD.
5) STATIC HAZARD, DO NOT RUB WITH DRY CLOTH.
N. T. S.
B. GRAY
R. CLOSS
S. NGUYEN
7ML19985FM01
HAZARDOUS LOCATION HAZARDOUS LOCATION
CLASS I, DIV 1, GROUPS A,B,C,D CLASS I, DIV 1, GROUPS A,B,C,D
CLASS II, DIV 1, GROUPS E,F,G CLASS II, DIV 1, GROUPS E,F,G
METAL CONDUIT
CERTIFIED
CONDUIT
SEAL
FITTING
JUNCTION BOX
CERTIFIED
CONDUIT
SEAL
FITTING
A,B,C,D & CLASS II, DIV 1, GR. E,F,G.
XPP-5
INTERCONNECTION DIAGRAM
MFA 4p - INSTRUCTION MANUAL
CERTIFIED
CONDUIT
SEAL
FITTING
XPP-5
CLASS I & II
METAL CONDUIT
CERTIFIED
CONDUIT
FITTING
REVISED HOUSING THREADS
2
PER ECN #00-000-0-0070
REVISED CABLE AND TERMINAL CONNECTOR
1
PER ECN #00-000-0-0037
0
FOR CONSTRUCTION
2365013102
1=1
SEAL
XPP-5
JULY
RWG SN
11/00
APRIL
RWG SN
18/00
MARCH
RWG
SN
27/00
23650131
2
1 1
Page 21