Bissell PROHEAT ADVANCED Quick Start Manual

QUICK START GUIDE
PROHEAT

Assembly Instructions

1. The only tool you will
need to assemble your
deep cleaner is a Phillips
screwdriver.
PARTS INCLUDED
a. Upper Handle
b. Base
c. 3" Tough Stain Tool
d. Upper Hose Rack
160-8122 01/16 RevB
®
2
1
2.
Slide Upper Handle (a.)
assembly onto lower body
and secure with two long
screws. These screws can be
found taped to the handle.
e. Lower Hose Rack h. Nozzle Clean Out Tool
f. Long Screws (2) i. Trial-Size BISSELL Formula
(taped to Upper Handle)
g. Short Screws (2)
(taped to Upper Handle)
1
2
3. 4.
Attach the Upper Hose Rack
(d.) to the back of upper
handle by pushing into open
slots and sliding down until it
snaps into place.
a.
e.
Refer to the enclosed user guide for complete
instructions and important safety notices.
1
5.
Attach Lower Hose Rack (e.) Attach Tough Stain tool to
by sliding it in place on the end of hose. Then wrap flex
lower body assembly and hose around hose rack and
securing it with two short secure it into notched out
screws. holder as shown.
b. c.
f. g. h.
WARNING
2
d.
i.