» Do not leave appliance when it is » Do not handle plug or appliance » Use only BISSELL cleaning plugged in. Unplug from outlet when with wet hands. products intended for use not in use and before servicing.
Thanks for buying a BISSELL carpet cleaner! We love to clean and we’re excited to share one of our innovative products with you. This guide has tips on using (pages 8-12), maintaining (page 13), and if there is a problem, troubleshooting (page 14).
Quick Release™ Cord Wrap SmartMix® Dial Ready-to-Use Hose ReadyTools™ Dial Power Switch Belt Access Door Extra Long Power Cord 6 Rows DirtLifter® PowerBrush Tool Caddy Floor Nozzle 2-in-1 Tank Spray Trigger Recline Pedal Cord Clip *Tools included may vary www.BISSELL.com...
Attach tools to the end of 2-Insert 2 screws into lower 2 holes located just above the hose or front of the the Lower Hose Rack. Turn the screws until tightened. upper handle. Wrap the power cord and hose. www.BISSELL.com...
Pretreating your carpet is recommended to improve cleaning effectiveness for heavily soiled carpet in high traffic areas such as entryways and hallways. a. Spray the BISSELL Stain PreTreat formula onto heavy traffic areas, soiled areas, or stains. b. Allow to penetrate for at least 3 minutes.
To reduce the risk of fire and electric shock when cleaning a hard floor, the BISSELL bare floor tool (203-5640) must be used and is only to be used with BISSELL Hard Floor Solutions formula intended for use with this machine.
Page 8
WARNING WARNING: To reduce the risk of electric shock due to internal component damage, use only BISSELL cleaning formulas intended for use with the deep cleaner. NOTE: Heatwave Technology® helps maintain the temperature of the water in your 2-in-1 tank while you’re cleaning.
Page 9
To Remove Ground-In Dirt: For Pet Stains & Odors: Renew your carpet! Erase pesky stains & remove odors! Pretreat ground-in Pretreat pesky dirt with a BISSELL pet stains with Pretreat Spray. BISSELL Pretreat Choose BISSELL spray before Professional Deep using your deep Cleaning formula cleaner.
If one of the tanks are empty, the machine will not spray. NOTICE: Do not overwet the carpet. Also take care not to run over loose objects, edges of area rugs, or the cord. -Stalling the brush may result in premature belt failure. www.BISSELL.com...
Page 11
When finished, rinse the hose and tool by suctioning warm water from a bowl. Allow the hose and tool to dry before storing the machine. WARNING WARNING: To reduce the risk of injury, be extra careful when cleaning stairs. Make sure the machine is secure and level. www.BISSELL.com...
2- Make sure the tank lid is secure and return the tank to dial and follow rinse instructions at the top of the machine. Follow cleaning instructions on pages 10 this page. and 11 to continue cleaning. *Don’t forget to check the formula tank and refill as needed! www.BISSELL.com...
Use the opposite side of the tool to clean the brush rolls by combing the bristles to help loosen hair or debris. Wipe the machine’s exterior with a soft cloth. Once your carpet is dry, vacuum again to remove any excess hair or fuzz on your carpet. www.BISSELL.com...
Examine the belt for breakage. If broken, please visit bissell.com for replacement part information. ReadyTools dial may be on the Set ReadyTools™ dial to the proper wrong setting for the cleaning job.
Service If your BISSELL product should require service: Contact BISSELL Consumer Care to locate a BISSELL Authorized Service Center in your area. If you need information about repairs or replacement parts, or if you have questions about your warranty, contact BISSELL Consumer Care.
Need help?
Do you have a question about the PROHEAT PET ADVANCED 1799 Series and is the answer not in the manual?
Questions and answers
cannot find the formula tank. can this be replaced
Yes, the formula tank for the Bissell ProHeat Pet Advanced 1799 Series can be removed and reinstalled, which suggests it can be replaced if necessary.
This answer is automatically generated