Sony XPERIA XZ2 Instruction Manual page 164

❖ Information
Depending on your environment, the connection
･
speed may be slow, or Wi-Fi may not be available.
When the terminal is connected to Wi-Fi network
･
successfully, "Connected" appears. If a different
message is displayed, make sure of the password
(security key).
When the connection is not established even if you
enter a correct password (security key), the correct IP
address may not have been acquired. Check the
signal status and reconnect. It may take 5 minutes or
more to display the connection result after the
operation of the connecting to Wi-Fi network.
If you connect to an access point that is not
･
connected to the Internet,
communication may be performed via mobile
network, not via Wi-Fi.
To use docomo services via Wi-Fi, you need to set up
･
your d ACCOUNT. From the Home screen,
u
[Settings] [docomo service/cloud]
setting] to set.
Deleting connecting Wi-Fi network
setting
From the Home screen,
1
u
[Settings]
u
Internet] [Wi-Fi].
Tap the Wi-Fi network that is
2
currently connected.
[FORGET].
3
appears and
u
u
[d ACOOUNT
u
[Network &
Adding a Wi-Fi network manually
Turn Wi-Fi on beforehand (P.161).
･
From the Home screen,
1
u
[Settings]
u
Internet] [Wi-Fi].
[Add network]
2
(SSID) of the Wi-Fi network.
Tap "Security" setting item
3
security type of the Wi-Fi network
you want to add.
Select from the 4 options: "None",
･
"WEP", "WPA/WPA2 PSK", or "802.1x EAP"
If required, enter security
4
information for the Wi-Fi network
you want to add.
[SAVE].
5
u
[Network &
u
Enter the name
u
Tap a
Settings
162