Wi-Fi
With Wi-Fi function, you can connect to an
access point for your home, company
network or public wireless LAN services to
use mail and Internet.
Reception interference caused by
■
Bluetooth devices
Wireless LAN (IEEE802.11b/g/n) devices and
the Bluetooth devices use the same
frequency band (2.4GHz). If you use the
terminal near Bluetooth devices, reception
interference may occur or the
communications speed may lower. Also,
you may hear noise or have a connection
problem. Communication may be
interrupted or sound may be lost when
playing back streaming data, etc. In these
cases, do the following:
Keep the terminal approximately 10 m or
・
more away from the Bluetooth device.
For using within approximately 10 m, turn
・
off the Bluetooth device.
Turning on Wi-Fi
From the Home screen,
1
u
[Settings]
Internet].
u
[Network &
Tap
for "Wi-Fi".
2
It may take a few seconds to turn on
・
the Wi-Fi.
❖ Information
Even when Wi-Fi is on, packet communication is
・
available. When a Wi-Fi network is disconnected, the
connection is automatically switched to the mobile
network. Note that packet communication charge
may be applied if the network connection is kept
switched.
Turn the Wi-Fi function to off when you do not use
・
Wi-Fi to cut battery power consumption.
For using Wi-Fi, make sure to receive sufficient signal
・
strength.
Connecting to a Wi-Fi network
From the Home screen,
1
u
[Settings]
u
Internet]
[Wi-Fi].
Select a Wi-Fi network to connect.
2
To connect to a protected Wi-Fi
・
network, enter the password
[CONNECT].
To connect a Wi-Fi network with WPS
・
compatible device, [Wi-Fi preferences]
u
[Advanced]
[WPS PIN Entry] and follow the
onscreen instructions.
u
[Network &
u
u
Tap [WPS Push Button]/
Settings
161