Battery Replacement - Monimoto SMART TRACKER User Manual

8. BATTERY REPLACEMENT

1. Remove Monimoto from your vehicle by releasing zip ties.
2. Remove the old CR123A batteries from the battery pocket.
3. Wait for 2 minutes. Otherwise you will not get fresh battery info on spot.
4. Position the new batteries and insert them into the battery pocket based on the
positive/negative terminals as indicated on the main board of Monimoto.
5. Place it back into the installation location of your vehicle.
6. Test Monimoto by following the instructions provided in ​
​
K EY v1
1. Open the KEY lid using 2 euro cent coin.
2. Remove the old battery from the battery pocket.
3. Position the new CR2032 battery and insert it into the battery pocket facing positive (+) terminal up.
4. Close the lid following small pointers with the same 2 euro cent coin.
KEY v2
1. Insert flat screwdriver into special hole and lift.
2. Two black plastic pieces should be separated. Position the new CR2032 battery and insert it into the
battery pocket facing positive (+) terminal up.
3. Firmly close cover till you click sound
T esting Monimoto.