1.1.6 Recognition Camera
This machine has the two recognition cameras: head camera and line camera.
A) Head camera
The head camera is installed on the head unit, and recognizes the precise position of board.
∗ Description uses the illustrations for the high-speed head (8 nozzles).
EJM4A-142E
B) Line camera
The line camera is installed on the main-body frame, and recognizes components (displacement,
inclination, chipping, etc.).
Line camera
4Z4C-001E
Process
Eight components are scanned and recognized all together, while the head is moved so that it
will cross over the line.
Component
Recognition
EJM4A-E-RMA01-A01-01
Line width: 55 mm
Conceptual illustration
pickup
Start
Batch recognition
Placement
4Z4C-006E
CM602-L
Reference Manual
4Z4C-009E
Recognition image
4Z4C-002E
Board
1.1 Names and Mechanisms of Units
Y
X
Positioning reference
Board
Conceptual illustration
Page 1-9