Inserting Batteries - FujiFilm Instax Square SQ 6 User's Manual / Troubleshooting

Inserting Batteries

Caution
• Use two new CR2 lithium batteries. (All the batteries should be new and be the same brand/type.)
• Insert the batteries before you load the instax SQUARE film pack.
• The battery performance may be reduced when it is cold. In this case, warm up the batteries to room temperature
before using this camera.
~
Ÿ
Open the battery lid.
Insert the batteries.
• Insert one CR2 lithium
battery straight (1)
matching the and
C
polarities and slide it
D
to the end (2).
Then, insert the other
battery.
!
To remove the batteries, remove one battery first, and
then slide the other battery and take it out.
Align the tabs on the
battery cover and push
the battery cover lock
until it clicks into place.
29
EN