Using Your Device While Traveling - Samsung Intrepid SPH-I350 User Manual

If your device is not yet activated, or if it is locked,
see "Activating Your Device" on page 6.
If your device does not detect a SIM card while in
GSM mode, it will display
corner of the Today screen.
Note All GSM, Global, and SIM menus and options noted
in this guide are available only when a valid SIM card
is properly installed in the device.

Using Your Device While Traveling

Your device is designed to enter global roaming mode
automatically when you enable your Sprint Worldwide
service, meaning that it should automatically connect
to an appropriate CDMA, GSM, or UMTS network when
you travel. Upon arriving in a country with CDMA voice
and GSM voice and data coverage, you must change
the device to mode to be able to access data
GSM only
services. You will need to change your device back to
Global mode when returning home or to a CDMA
destination.
X
in the upper-right
GSM Mode Setup
To select GSM only mode:
1. Press
> Settings > Personal > Phone
2.
From the tab, touch the
Network
field and select GSM only
configures the device to communicate
CDMA only
only with CDMA networks.
GSM only configures the device to communicate
only with GSM networks.
configures the device to communicate with
Global
CDMA, GSM, or UMTS networks when detected.
3.
Complete the following GSM network selection
procedures.
Note While in the United States, your device will operate
only in CDMA mode; domestic GSM networks will
not be accessible via this device.
3E. Sprint Worldwide Wireless Service
.
Mode of operation
. Options include:
189