2.
From the align screen, use your stylus to calibrate
the touch accuracy of the screen by both
accurately and firmly tapping the center of each
target (crosshair). Repeat this process for every
target that appears until completed.
Stylus
3.
Review the onscreen tutorial screens by touching
Next
to continue onto the next page.
– or –
Touch
to move onto the password setup
Skip
portion of your initial setup where you can create a
password which must be used to access your
device's features and data.
4.
Touch
to continue with the password setup.
Next
– or –
Touch
to set up a password at a later time and
Skip
continue onto step 10.
5.
Touch the
Prompt if device unused for
enable the feature. (Enabling this option activates
the remaining fields.)
6.
Select each field and enter the desired information:
: to select the amount of unused time (idle)
Minutes
required before you are prompted for a password.
Password type
: to choose from one of the following
PIN types:
: must be at least four characters in
Simple PIN
●
length and cannot contain a simple sequence
such as 0000, 1111, or 1234.
Strong alphanumeric
●
characters in length and must contain at least
one character from each of the following
categories: uppercase/lowercase letters,
numerals, and symbols. Examples of strong
alphanumeric passwords are
.
%$VH5hW
1A. Setting Up Service
checkbox to
: must be at least seven
and
sb?8A!3
5