Error Codes; Troubleshooting - Morphy Richards Supreme Precision 10 in 1 Multicooker Instructions Manual

562000 Rev2.qxp_Layout 1 19/01/2015 09:25 Page 28

Error Codes

Error Code
• E1
E3
•
E5
•

Troubleshooting

Problem
• The device doesn't work.
The buttons (21)-(30)
•
react immediately.
• Water is leaking from the Lid
The Lid (2) is open but the Lid
•
Lock Icon (33) on the Control
Panel (8) shows the closed
padlock.
The programme has stopped
•
before the end.
• The Mixing or Pulse functions
are not working.
28
Cause
• The motor is overloaded.
The Jug (4) is not correctly
•
inserted into the Main Unit (5).
The Jug was removed during
•
use.
The Motor burn out safety
•
switch has switched on.
Issue
• Your Multicooker is not
connected to the mains.
The Mains Lead
•
properly connected to the Cable
Socket (7) on the Main Unit (5).
The On/Off Switch
•
off or your Multicooker is in
standby.
do not The buttons on the Control
•
Panel (8) require the right
contact time.
(2) • The Lid Gasket
attached correctly.
The Lid Gasket in the Lid is
•
damaged
There is some food in the
•
sensor at the top of the Jug
Handle (3) or on the Main Unit
(5).
Your Multicooker has lost power
•
temporarily.
• The Lid is not correctly attached
to the Jug.
These functions are not
•
available during this part of the
process.
Solution
• Reduce the amount of food in
the Jug (4).
Remove any food residue from
•
the Paddle (11), or Blades
(12),(13).
Insert or replace the Jug into
•
the Main Unit.
Let your Multicooker cool down
•
for at least 30 minutes.
If the problem persists after
cooling down, contact Morphy
Richards.
Solution
• Plug the Mains Lead
the socket on the wall.
(19) is not Switch the On/Off Switch
•
off, and insert the Mains Lead
into the Cable Socket.
(9) is set to Switch the On/Off Switch on, or
•
press the Standby Button (22).
Touch or press the buttons for a
•
longer period.
(16) is not • Check the Lid Gasket on the
underneath of the Lid is in place
and correctly attached.
Contact Morphy Richards.
•
Remove any food residue left
•
on/in your Multicooker, if the
problem persists, do not use.
Contact Morphy Richards.
Switch the On/Off Switch
•
off, and check the Mains Lead.
Continue the recipe using the
manual settings.
• Correctly attach the Lid to the
Jug.
Do not try to use.
•
(19) into
(9) to
(9) to