Installing The Driver; Windows 2008 R2 Environment - Hitachi HA8000 Series User Manual

5

Installing the Driver

This chapter describes how to install the network driver of the LAN Card in the Windows 2008 R2
environment. When the LAN expansion function is used, see "Instructions for Setting the LAN
Expansion Function " contained in the "Drivers Kit 1K-0*" CD. (* is an arbitrary number).
The supported OS varies depending on the system unit to which the driver is to be installed.
Always confirm the supported OS of the system unit to which it is to be installed. For details about
how to install drivers of optional Cards including this LAN Card, see the software guide supplied
with the system unit.

Windows 2008 R2 Environment

When connecting the LAN cable to the network interface connector, pay
Drivers bundled in the Windows 2008 R2 cannot be used.
When this LAN Card is added, be sure to apply the driver in the "Drivers
Kit 1K-0*" CD. (* is an arbitrary number).
If the driver is preinstalled in such a case as a factory expanded model, it
is not necessary to install the driver unless otherwise specified.
□ Installing the driver for the Windows 2008 R2
When using this LAN Card, install the network driver for the Windows 2008 R2. Here is described
the installation procedure for updating the driver, provided that Windows 2008 R2 is already
installed.
1 Log in with the user name having the administration authority (such as Administrator).
2 Click [Hardware] of [Control Panel] and then click [Device Manager] of [Devices and Printers]. In
the Device Manager window, double-click [Intel(R) PRO/1000 PT Dual Port Server Adapter] under
[Network adapters].
13