Treadly TR100 User Manual page 14

Problem
Treadmill is not
working.
The treadmill display
shows an E2 error
message.
The treadmill display
shows an E5 error
message.
Treadmill
unexpectedly stops.
Noises are heard
from the treadmill
during your workout.
Treadmill has
shutdown
unexpectedly after
inactivity.
Treadly TR100 treadmill
Possible causes
There is no electricity going to
the treadmill from the outlet,
or the treadmill is not properly
connected to a 110 volt outlet
The treadmill is overheated
and there is a large buildup of
friction.
The treadmill running surface
has significantly shifted to the
left or the right.
The treadmill was used
continuously for more than
100 minutes.
Certain noises are generated
by the treadmill engine and its
cooling system.
When the treadmill is in
Standby mode for more than
10 minutes, the treadmill will
completely shut down the
power.
contact@treadly.co
Solution
Make sure that the
treadmill is properly
connected to a working
110 volt outlet.
Stop using the treadmill
for 30 to 60 minutes, to
let it cool down.
Lubricate the running
surface. For more
information, see
Lubricating your
treadmill.
Adjust the running
surface. For more
information, see
Adjusting the running
surface of your
treadmill.
The treadmill
automatically stops
after 100 minutes of
continual use. Resume
work out in 30 minutes.
Treadmill is functioning
normally.
Restart the treadmill by
stepping in each area of
the running surface to
get the running surface
moving.
page 14