Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Treadly TREADLY 2
Summary of Contents for Treadly TREADLY 2
- Page 1 TREADLY 2 USER MANUAL...
- Page 2 Treadly. as well as to avoid causing any damage to the machine. Do not use the Treadly if it is not working as described in the manual. This symbol represents precautions that you must take and follow carefully in order...
- Page 3 To avoid damage, do not put your fingers or electronics of the Treadly. If you fail to use the any foreign objects in the gap of the belt. Treadly in accordance with the precautions...
- Page 4 Light. Smart. Compact.
-
Page 5: Table Of Contents
__________________________________________ __________________________________________ Handrail Unfolding / Folding Maintenance __________________________________________ __________________________________________ Moving & Powering the Treadmill Maintenance Continued __________________________________________ __________________________________________ Power Supply / Powering Your Treadly Limited Warranty ___________________________________________ ___________________________________________ Get to Know Your Treadly ___________________________________________ Handrail Control ___________________________________________ Display Window ___________________________________________... -
Page 6: Support & Specifications
Aplicable Ages 12 - 60 SERIAL NUMBER Lifting Slope % Fixed Display White Matrix Digital Familiarize yourself with all warnings on the Treadly 2 before use. If a warning label is damaged or lost, contact our support for a replacement immediately. -
Page 7: Unpacking
Unpacking Place the Treadly 2 box on a flat, level, stable Place the shipping materials and styrofoam surface. Apply caution while carrying the box. protective back in the box, fasten the upper Never unpack from the sides. and lower covers of the box, and store the box. -
Page 8: Handrail Unfolding / Folding
UNLOCK position. When the handrail is In the folded position. Treadly 2 maximum speed is 4 mph. When unfolded, its top speed is 5 mph. To fold the handrail, switch the two-way lock switch to the UNLOCK position and fold the handrail down. -
Page 9: Moving & Powering The Treadmill
Moving & Powering the Treadmill Before moving the unit, remove the power cord plug from the wall outlet and make sure the handrail two-way lock switch is in the LOCK position. To move your unit, make sure the handrail is folded and the two-way lock switch is in the LOCK position. -
Page 10: Power Supply / Powering Your Treadly
Power Supply / Powering Your Treadly Treadly 2 must be connected to a wall outlet The unit is equipped with a power switch that is that is grounded. If the product fails, located on the right side of the front cover. -
Page 11: Get To Know Your Treadly
Located in the middle of the handrail, you will see a large red button. If you encounter an emergency while using Treadly 2, press the emergency stop button and the unit will come to a halt. To restart Treadly 2, turn off the emergency stop by closing the latch underneath of the handrail and then press the START button on the handrail to start. -
Page 12: Handrail Control
Handrail Control The handrail buttons are used to start, pause, stop, accelerate/decelerate, and switching modes (automatic / manual) the Treadly 2 | 12... -
Page 13: Display Window
Display Window When powering on Treadly 2, turn on the power switch and the display will illuminate. The display window uses white matrix numbers to display the speed, number of steps, time, mileage motion parameters, and the current operational mode (M/A). -
Page 14: Remote Control
0.3 mph. Start-stop composite button. Starts and stops the Treadly. Mode switch button. Use to switch between manual control mode and automatic control mode. Treadly’s remote control uses two batteries (1.5 V NO. 7 AAA Alkaline battery). Wireless transmission identification. -
Page 15: Remote Control Continued
3. Press and hold any button on the remote control for more than five seconds. 4. Treadly will react and show the following figure on the display window: 5. If the figure above does not appear on the Treadly's display window, repeat these steps until it does appear. -
Page 16: Manual Control Mode
1/3 of the belt (Deceleration Zone). No-load function If you do not walk on the machine for 10 seconds after starting your Treadly, it will automatically stop. Beginners should accelerate slowly. When using the handrail buttons, hold the handrail with one hand. -
Page 17: Remote Control Mode Continued
Start Press the remote Start / Stop button to start or stop the Treadly. There are two modes: 1. Standby mode: press the Start / Stop button to start the Treadly. 2. When Treadly is in operation: press the Start / Stop button to stop the Treadly. -
Page 18: Automatic Control Mode
Orthotic insoles or high heels are not suitable for this mode. Automatic control mode requires learning and adaptation. Start Start at the back of the Treadly belt, and walk three steps at a normal walking pace. Maintain 2 - 4 inches of space between each foot (see picture below). ... -
Page 19: Automatic Control Mode Continued
Switch modes If any button is pressed on the handrail or remote controller while the Treadly is in its Constant Speed Automatic Speed Mode, Treadly disables the To maintain your speed, move your center of... -
Page 20: Sleep And Wake Up
1. Press any function button on the the same direction as you would normally handrail. The display window will step on the Treadly. If the foot is any other illuminate, and the button light will turn direction, the wakeup will fail. -
Page 21: Bluetooth Speakers
Treadly, there are three troubleshooting phone to pair. solutions: 2. Open the Settings on your phone. 1. Power on the Treadly and wait 10 seconds. 3. Select the Bluetooth settings, and Restart the Treadly and then refresh the make sure Bluetooth is on. -
Page 22: Maintenance
Treadly box to turn the adjustment bolt on the left side, clockwise by 90 degrees. Once you do this, operate the Treadly at the speed of 1.8 mph. After running for 1 minute, observe whether the walking belt is centered. -
Page 23: Maintenance Continued
Do not place the Treadly under direct sunlight or high temperatures. Lubrication steps • Lift Treadly from the side and tilt it at a 45 degree angle. • Lift up the belt by hand and pour the WARNING! Unplug the Treadly's power lubricating silicone oil on the front, middle, cord before cleaning or maintaining it. -
Page 24: Limited Warranty
Limited Warranty Thank you for purchasing Treadly! Read this product warranty carefully and keep it in a safe place. The warranty is for the original purchaser only, and cannot be transferred. Warranty period The warranty period is valid 1 year from the date of purchase if used under normal conditions.
Need help?
Do you have a question about the TREADLY 2 and is the answer not in the manual?
Questions and answers
Sensor indicated the Treadly needed oil. I have oiled the tread. How do I reset the sensor. Thank you
To reset the sensor on the Treadly 2 after oiling the tread:
1. Lift the bars up.
2. Push down the emergency flap, then bring it back up.
3. Press and hold the stop button for 10 seconds.
The reset message should blink and then disappear.
This answer is automatically generated
Still in business?
Based on the provided information, a user mentioned that their Treadly 2 treadmill is not working and that the mobile app shows a maintenance message. They also noted that the company recently closed. This suggests that Treadly 2 is no longer in business.
This answer is automatically generated