Installing Your Software; Obtaining A Driver And Additional Software; Before You Install; Installing Your Driver - Matrox MURAIPXI-E4JHF User Manual

Installing your software

This section describes how to install your Matrox driver and software.

Obtaining a driver and additional software

If your Matrox product was provided by the manufacturer of your system, check the web
site of that manufacturer for the latest driver. A driver provided by the manufacturer of
your system is more likely to be tested with your system model.
Matrox makes the latest drivers, software, and utilities available on the Matrox Mura
product page (www.matrox.com/graphics/en/support/drivers/download/mura).
For additional SDKs and APIs, contact your Matrox representative.

Before you install

You may need administrator rights to install or uninstall certain software, or to change
certain settings. For more information, see Windows documentation.
To avoid potential problems, we recommend you install the latest Service Pack and hot
fixes for your version of Windows.

Installing your driver

Windows

Download and run the Matrox driver package, then follow the on-screen instructions.

Linux

Download and run the Matrox driver package for Linux, then follow the on-screen instructions. For
more information on the supported Linux distributions, see the Readme file included with your
package for Linux.

Installing your APIs

Run the MSI from your Matrox API package. For more information, see the documentation included
with your Matrox API.
50 Matrox Display Wall – User Guide