Table of Contents
Advertisement
Settings
Back
Living Room
Standard
Preview
Playback
Access Camera Settings:
From your main device list, click on the camera you want to edit, then
press "
" button on the top right for advanced settings.
Device Name:
Press to rename your device to something like "Bedroom"
or "Kids' Room".
Device Sharing:
let friends, spouse, roommates, or family keep an eye
on what your cameras see. Whether it's a baby's crib or the family dog, you
can decide who gets to check in, access the camera, and set notifications.
Remove Device:
Delete the camera from your account. Until it's deleted, it will always be
linked to your account.
10
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MI-CW007-199W and is the answer not in the manual?
Questions and answers
Wont Construct Encryption Channel. Takes pictures of movement but wont load live camera.
The Merkury Innovations MI-CW007-199W may not construct an encryption channel or load the live camera due to the following reasons:
1. Wi-Fi Compatibility: The camera only supports 2.4GHz Wi-Fi networks and is not compatible with 5GHz networks. If connected to a 5GHz network, it may fail to establish a connection.
2. Network Issues: Incorrect Wi-Fi credentials, weak signal strength, or network interference can prevent the camera from connecting properly.
3. Firmware or Software Issues: If the camera's firmware is outdated or the Geeni app is not updated, it may cause connection failures.
4. Improper Setup: If the camera is not blinking red during setup or was not reset properly before attempting to connect, the encryption channel may not establish correctly.
5. QR Code Mode Failure: If the QR Code method is not used correctly or the camera does not recognize the QR Code, the connection may not complete.
6. Storage Issues: If the camera's storage (Micro SD card) is full or malfunctioning, it may impact live streaming.
7. Regulatory and Interference Issues: The camera complies with multiple regulatory standards, but interference from other wireless devices may disrupt the connection.
To resolve the issue, ensure the camera is on a 2.4GHz network, reset it, verify credentials, update the Geeni app, and retry setup using the correct method.
This answer is automatically generated
What app should I use to access camera