Safety Instructions For Installation - Miele CS 1018 G Operating And Installation Instructions

Fit the wall units and rangehood before fitting the CombiSet to avoid damaging
it.

The veneer or laminate coatings of worktops (or adjacent kitchen
units) must be treated with 100 °C heat-resistant adhesive which will
not dissolve or distort. Any splashbacks must be of heat-resistant
material as well.

An electric fryer must not be installed directly next to a gas
cooktop as the gas flames could ignite the fat in the fryer. It is
essential to maintain a distance of at least 288 mm between these
two appliances.

The CombiSet must not be installed over a fridge, fridge-freezer,
freezer, dishwasher, washing machine, washer-dryer or tumble dryer.

When installing the CombiSet, make sure that the gas hose and
electrical connection cable cannot come into contact with hot
appliance parts.

The electrical cable and any flexible gas connection pipes must be
installed in such a way so that they do not come into contact with
any moving kitchen parts (e.g. a drawer), and cannot become
trapped.

Observe carefully the safety clearances listed on the following
pages.
All dimensions in this instruction booklet are given in mm.

Safety instructions for installation

35