Mitsubishi Electric Mr. SLIM PEAD-RP60JA Technical Manual page 2

Air volume control technical manual
Indoor unit air volume can be controlled with a opening-closing of a damper by either an analog input (CN2A) or a
contact input (CN105) to the air conditioning unit.
With the PEAD series, it is possible to cut energy consumption by controlling not only the air volume but also the
compressor capacity.
■ Corresponding model
Air volume can be controlled with the following models.
(1) PEAD-RP60,71,100,125,140JA(L)
(2) PEFY-P63,71,80,100,125,140VMA(L)-E
NOTE:
Air volume control with analog input 0-10V is not available with the following models.
(a) PEAD-RP35,50JA(L)
(b) PEFY-P20,25,32,40,50VMA(L)-E
■ System configuration
PEAD
CN2A
CN105
Outdoor unit
Indoor unit
Air inlet
MA Remote
controller
Supply connectors to CN2A and CN105 on site. (Refer to 5)
* MAC-397IF-E:MA & Contact terminal interface (optional)
PEFY
M-NET
Outdoor unit
Indoor unit
Air inlet
Centralized controller
MA Remote
(AG-150A)(optional)
controller
Supply connectors to CN2A and CN105 on site.
* MAC-397IF-E:MA & Contact terminal interface (optional)
Damper System
Controller
Analog input
Contact input
MAC-397IF-E *
Bypass damper
Damper System Remote controller
Field supply
M-NET
Damper System
Controller
CN2A
Analog input
Contact input
CN105
MAC-397IF-E *
Bypass damper
Damper System Remote controller
Field supply
Damper
CN2A
Analog input
Contact input
CN105
MAC-397IF-E *
Indoor unit
Air inlet
Damper
MA Remote
controller
1
Damper System
Controller
Bypass damper
Damper
Damper System Remote controller
Field supply