Page 1
Thank you for purchasing the HW-02G. This HW-02G brings you a high speed wireless network connection. This document will help you understand your HW-02G so you can start using it right away. Please read this document carefully before using your HW-02G.
Wi-Fi devices (such as smartphones, tablet computers, and game consoles) or computers can all access the Internet through HW-02G. The specific connection procedure depends on the operating system of the Wi-Fi device or computer. Establish a connection according to your device's specific instructions.
Page 3
Scenario 1: Connecting multiple devices Scenario 2: Connecting multiple devices through Wi-Fi through Wi-Fi and USB simultaneously...
Page 4
Appearance Power button Lanyard hole Screen Micro USB port...
Page 6
Status bar Character zone When connect to GSM/3G/LTE network, show the operator name When connect to public Wi-Fi hotspot, show the SSID name of the hotspot When SIM card is not normal, show "PIN1 code required"/"PIN unlock code required"; ...
Page 7
Signal strength R: when in roaming status; Show network mode, including "3G/LTE". : when connecting to public Wi-Fi hotspot. Icon of traffic. Show the icon when connect to network. When there is upload and download data the icon changes color.
Page 8
Wi-Fi Mode When HW-02G is during DFS checking progress, the DFS icon show and flashes. When HW-02G connect to the 5G_W52/W53 network that can be only used indoor only, show this icon. Otherwise hide the icon. Show it when connected to USB cable and HW-02G supports Charging with standard functions process.
SSID and Wireless Network Encryption Key When a Wi-Fi device establishes a connection to the HW-02G for the first time, you may need to enter the default Service Set Identifier (SSID) and wireless network encryption key. These are printed on the HW-02G.
manufacturer. Use of an incompatible charger or one from an unknown manufacturer may cause the HW-02G to malfunction, fail, or could even cause a fire. Such use voids all warranties, whether expressed or implied, on the product. The HW-02G’s charger model is HW-050100XYW. X and Y represent letters or ...
You can quickly connect to the Internet by following these steps: Step 1: Turn on the HW-02G Press and hold the button until the screen lights up, indicating that the HW-02G is turned Note: Press and hold the button to turn off the HW-02G.
Wait a moment for the wireless network connection icon to appear in the system tray in the lower right corner of the computer screen. The wireless network connection is then established. Step 3: Connect to the Internet If data is transmitted, the HW-02G will automatically connect to the Internet. If data is not...
HW-02G will automatically disconnect from the network connection. Logging In to the Web Management Page Make sure the connection between the HW-02G and the Wi-Fi device or computer is working normally. Open the browser, and enter http://hw-02g.com in the address box.
Pressing any button causes the display screen to light up. When the HW-02G is being powered only by the battery, you can choose to enable or disable the automatic Wi-Fi turnoff function. If this function is enabled and if no Wi-Fi devices access the HW-02G for a period of time, the Wi-Fi turns off automatically.
If you forget some configuration parameters, you can restore the HW-02G to its factory settings and then configure the HW-02G again. Press and hold the RESET button until the display screen turns off. The HW-02G is then restored to its factory settings.
Select Scan to search for wireless networks. A list of access points will be displayed on the screen. Select the access point with the HW-02G's SSID, and press the ► button on the PSP. Confirm the SSID, and enter the correct wireless network encryption key.
Page 18
save settings. Select Test Connection to test whether the network connection is successful. You can now open the browser and access the network.
(The lock icon indicates that the encryption key is required to connect to this wireless network.) Note: Wi-Fi devices, such as an iPhone, iPod touch, PS3 and NDSi, can all access the Internet through the HW-02G. For specific operations, refer to the Wi-Fi device's user manual.
Page 20
Tips When the HW-02G is in use for an extended period of time, it will become warm and may overheat. Should this happen, the HW-02G will automatically close the network connection and turn off to protect itself from damage. If this occurs, place the HW-02G in a well ventilated space to allow the heat to dissipate, then turn it on and continue to use it as normal.