Adjusting The Saddle Offset (Isp) - Giant Propel Advanced SL Disc Series Manual

8 ADJUSTING THE SADDLE OFFSET (ISP)

The saddle clamp can be assembled forward or backward. So you can compensate with a +5mm or
-15mm position.
WARNING: Saddle clamps must be assembled as illustrated. If the clamps are not aligned,
they may damage the saddle.
This may result in damaging the seatpost, and seatpost failure can result in serious personal
injury or death.
Offset: -15mm
ISP SYSTEM TORQUE VALUE
WARNING: Bolts that are too loose or too tight can cause to lose efficacy of saddle clamp. Do
not exceed the maximum torque value. Over-clamping bolts may damage components or
frame, which could result in serious personal injury or death.
Saddle clamp bolt: maximum 12 Nm
Seatpost bolt: maximum 4 Nm
SADDLE CLAMP BOLT
MAX 12 Nm
SEATPOST BOLT
MAX 4 Nm
Offset: +5mm
MICRO ADJUST NUT
9