TC-Helicon HARMONY SINGER 2 User Manual
Battery-powered vocal effects stompbox with
guitar-controlled harmony, reverb and tone
Hide thumbs
Also See for HARMONY SINGER 2:
- User manual ,
- Quick start manual (10 pages) ,
- Quick start manual (9 pages)
Related Manuals for TC-Helicon HARMONY SINGER 2
Summary of Contents for TC-Helicon HARMONY SINGER 2
- Page 1 HARMONY SINGER 2 Battery-Powered Vocal Effects Stompbox with Guitar-Controlled Harmony, Reverb and Tone User Manual...
- Page 2 Harmony Singer 2 User Manual 9. Do not defeat the safety purpose of the polarized 20. Please keep the environmental aspects of battery Important Safety or grounding-type plug. A polarized plug has two blades disposal in mind. Batteries must be disposed-of at a Instructions with one wider than the other.
- Page 3 Harmony Singer 2 User Manual 1. Controls (9) (10) (11) (12) (1) HARMONY knob selects the harmonies that will be blended with your voice. (8) USB input accepts a micro USB cable for connection to a computer. Use the See Chapter 2: Using the Harmony Knob for details.
- Page 4 Harmony Singer 2 User Manual 2. Operation Connection Micro USB cable MP-75 microphone Mixing board Power cable...
- Page 5 Using the Harmony Knob • Harmony Singer 2 can operate on 4 AA batteries. Remove the single screw on The Harmony knob selects a single harmony voice or combination of voices the bottom of the pedal to open the battery door. Make sure to observe correct higher or lower in pitch than your voice.
-
Page 6: Specifications
Harmony Singer 2 User Manual 3. Specifications Input Mic Input Impedance: Balanced: 2.68 kOhm Mic Input Level @ 0 dBFS: -42 dBu to +1 dBu EIN @ Max Mic Gain Rg = 150 Ohm: -126 dBu Mic input SNR: >104 dB... - Page 7 Harmony Singer 2 User Manual...
Need help?
Do you have a question about the HARMONY SINGER 2 and is the answer not in the manual?
Questions and answers
can I connect it to my pedal board playing electric guitar w/o it being affected by the other effects?
The TC-Helicon HARMONY SINGER 2 can be connected to a pedal board for electric guitar, but placing some guitar pedals before its Guitar Input jack may negatively affect vocal harmony production. To avoid issues, guitar pedals should be connected between the Harmony Singer's Guitar Output jack and the input of the amp.
This answer is automatically generated
Can the harmony singer be modified to harmonize at 432hz tuning
The TC-Helicon Harmony Singer 2 manual does not mention any feature for adjusting the tuning reference to 432Hz. It provides harmony intervals based on the input signal but does not specify options for changing the standard tuning from 440Hz to 432Hz.
This answer is automatically generated