Related Manuals for Avantco 360ADC4HC
Summary of Contents for Avantco 360ADC4HC
- Page 1 User Manual Ice Cream Dipping Cabinet User’s Manual 03/2018 360ADC4HC, 360ADC4CHC, 360ADC4FHC 360ADC8HC, 360ADC8CHC, 360ADC8FHC Please read the manual thoroughly prior to equipment set-up, operation and maintenance. - 1 -...
- Page 2 User Manual Warning DANGER – RISK OF FIRE OR EXPLOSION. FLAMMABLE REFRIGERANT USED. TO BE REPAIRED ONLY BY TRAINED SERVICE PERSONNEL. DO NOT PUNCTURE REFRIGERANT TUBING. DANGER – RISQUE DE FEU OU D’EXPLOSION. LE FRIGORIGÈNE EST INFLAMMABLE. CONFIER LES RÉPARATIONS À UN TECHNICIEN SPÉCIALISÉ. NE PAS PERFORER LA TUBULURE CONTENANT LE FRIGORIGENE.
-
Page 3: Transportation And Installation
User Manual Transportation and Installation Please read this manual thoroughly prior to equipment set-up, operation and maintenance. • To prevent compressor or system damage, do not transport the unit on an incline of more than 45 degrees. • Do not use the condenser, lid, or hinges as loading or unloading points. •... -
Page 4: Adjusting The Temperature
User Manual Adjusting the Temperature The temperature in the cabinet can be adjusted with the control knob. If your unit has a numbered control knob: Setting between “4” and “5” is standard for storage and service of ice cream. If a different temperature is needed nob may be adjusted to a lower number (warmer) or a high number (colder). -
Page 5: Loading Product
User Manual Operation/Maintenance NOTE: We strongly recommend that any servicing be performed by an authorized service technician. Loading Product • In order to save energy, limit the number of times the lid is opened and the length of time the lid is open. •... - Page 6 User Manual Glass Canopy Assembly INCLUDED HARDWARE • (1) 360BARFRNT front rail • (2) 360BARSIDE side rail • (4) 360PLATE metal plate for side rails • (8) 360CORNER L-shaped bracket • (11) 360SCREW small screws for rails • (20) 360GLSSCREW large screw for glass panels 1) Install the 3 plastic channels along the sides and front of the cabinet using the Phillips screws and white washers.
- Page 7 User Manual 3) Insert the front glass panel into the front channel. Then, use the L-shaped brackets and the fasteners that are pictured to attach the front glass panel to each of the side panels. There are two bracket mounting locations on each side; one at the top, and one at the bottom. 4) Install the gasket on the top edge of the front glass panel, and place top glass panel atop the front and side panels.
-
Page 8: Warranty Information
1 year from the date of delivery. If a qualified product is found to be defective during this period, Avantco Refrigeration will repair the defective unit, replace any defective parts, or replace the defective unit.
Need help?
Do you have a question about the 360ADC4HC and is the answer not in the manual?
Questions and answers
What is the temperature replacement knob order number for avantco dip Freezor mod. 360adc4hc