LELY WELGER RP 202 CLASSIC Operating Manual page 20

1725-159
3
4 5 6
fig. 15
1724-54
3
4
5
6
fig. 16
16
Important: Depending on the equipment configuration, a rigid
or rotatable drawbar eye can be fitted. (observe local
regulations!) The drawbar eye [3] can be rotated about its
longitudinal axis, but has to be locked for a open-type hitch
attachment
1
drawbar eye [3] from turning by fitting parts 4, 5 and 6.
2
For tow hitch (low hitch) attachment, do not prevent drawbar eye
[3] from moving, i.e., parts 4 - 6 not be fitted. Parts 4 – 6 are
included loose with the delivery of balers having rotating
drawbar eyes.
The horizontal protective blacket underneath the drawbar must
be set for a minimum ground clearance of 50 cm.
2
Note: All fastening screws and nuts must be done up tightly:
Component
1
Bracket,
(RP 202 / RP 302)
Bracket, strengthened
Drawbar eye
Table 2: Tension moment
For open-type hitch (high hitch) attachment, prevent
see...
Fig 13
Fig. 14
Fig. 15 and Fig 16,
Pos. 1
WELGER RP 202 • RP 220 • RP 302 • RP 320
Tension
moment
270 Nm
450 Nm
350 Nm