To avoid the risk of electric shock, do not disassemble the iron, take it to the nearest authorized Rowenta Appliance Service Center for examination and repair. Incorrect reassembly can cause a risk of electric shock when the iron is used.
3. After the iron has cooled, wrap the cord loosely around the handle. 4. Your Rowenta appliance is intended for household use only. SAVE THESE INSTRUCTIONS...
Page 4
B C D E Description: A Burst of steam button B Water Filling Inlet C Steam control D Temperature control E Water tank F Handle release G Voltage Selector H Soleplate 240 V 120 V...
This will quickly disappear. FOLDING HANDLE The handle should be in the upright position while the iron is in use. To lock the handle in the upright position, lift the handle and it will automatically lock.
Page 6
(inner seam). Steam can only be produced when the thermostat is in the colored cotton/linen zone. SETTING STEAM CONTROL Slide the steam control towards the back of the iron until the steam icon appears, so it is in the steaming position. Steam can only be produced when the thermostat is in the colored cotton/linen zone.
POINTS TO NOTE If the iron has not been used for a long time (e.g. several weeks) the steam holes should be cleaned and any deposits removed from the iron. To do this, hold the iron horizontally before you start to use it and allow it to produce steam for about 1 minute.
Page 8
WATER TO USE IN ROWENTA IRONS Tap water Rowenta irons are designed to be used with REGULAR TAP WATER (up to 12 grains of hardness). If your water is harder than this, Rowenta recommends mixing half tap water with half distilled water which reduces the hardness;...
For more information refer to the full use instructions. If after using the trouble shooting guide you are still experiencing problems, do not return the iron to the store, but contact Rowenta Consumer Service who will be pleased to assist you.
Need help?
Do you have a question about the Travel Iron and is the answer not in the manual?
Questions and answers