Use caution when you turn a steam iron upside down there may be hot water in the reservoir. 9. The use of accessory attachments is not recommended by Rowenta Appliance Company and may result in fire, electric shock or personal injury.
12-ampere cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that it cannot be pulled or tripped over. 3. Your Rowenta appliance is intended for household use only. SAVE THESE INSTRUCTIONS...
Page 4
Description: H Pilot light A Spray nozzle B Covered water filling inlet C Variable steam control K Power cord D Self clean system E Spray button L Transparent water tank F Burst of steam button M Stainless steel soleplate G Auto-off indicator light N Water level indicator (depending on model) Temperature control dial...
It is normal for a small amount of smoke to be produced the first time the iron is used. This will quickly disappear. 3-WAY AUTO-OFF (depending on model) If the iron is not moved while it is plugged in, an internal safety switch will turn it off. 30 sec.
Laundry label To avoid an automatic switch off while the iron is heating up, always keep the iron on its heel. Start at low temperature and graduate to high temperature. For delicate fabrics we recommend carrying out a test on an unobstrusive part of the garment (inner seam). Steam can only be produced when the thermostat is in the red cotton/linen zone.
POINTS TO NOTE If the iron has not been used for a long time (e.g. several weeks) the steam channels should be cleaned and any deposits removed from the iron. To do this, hold the iron horizontally before you start to use it and allow it to produce steam for about 1 minute.
WATER TO USE IN ROWENTA IRONS Tap water Rowenta irons are designed to be used with REGULAR TAP WATER (up to 12 grains of hardness). If your water is harder than this, Rowen- ta recommends mixing half tap water with half distilled water which reduces the hardness;...
If your water supply contains large amounts of iron or organic matter, these minerals can collect inside the iron and eventually appear as brown stains. If you experience these problems Rowenta recommends using inexpensive bottled spring water. Never use 100% pure distilled water.
In normal use a draggy coating may build up on the soleplate (starch, detergent buildup, burnt synthetic fibers). This can be easily removed by using the Rowenta Soleplate Cleaning Kit or a quality hot iron soleplate cleaner available at most stores.
Page 11
For more information refer to the full use instructions. If after using the trouble shooting guide you are still experiencing problems, do not return the iron to the store, but contact Rowenta Consumer Service who will be pleased to assist you.
Need help?
Do you have a question about the Professional Luxe Professional Luxe Steam Iron and is the answer not in the manual?
Questions and answers